Do it Yourself - Riding Tips - Tech Tips - Maps - Extreme Performance
I got sick of the Red back lighting on my speedo.....so I decided to swap out the LED's for Blue ones. You can use any color LED, I just chose blue...
Alright. This is my first attempt at doing one of these so I hope it turns out ok. You will need a random assortment of tools like: allen...
Hello guys and gals....Im will be installing the motovation no cut frame sliders on my 2008 gsxr 600. (sitting on the bike) brake side. Remove...
1. Remove lower fairing 2. Remove oil drain plug 3. Wait for oil to drain
Secondary injectors above and primary below. Sorry for the crappy angle but they are kind of hidden up in there. They look just like the connectors...
i assume the K7 is the same as the K6 and the 600 to the 750 so this will apply to both save your self the $$ and DIY its not that hard. i busted out...
after much demand, im attempting to do a write up on how to install a set of galfer brake lines. Here goes nothing Remove this panel first ...
:::HOW TO REMOVE THE PAINT FROM YOUR RIM FOR A POLISHED LOOK::: You want to strip some paint from your rims to give it that "custom" polished...
This is what I do whenever I do brake maintenance on bikes and it always works great. I first start by pulling the calipers off the bike. Once the...
Right side rearset... Remove 2 allen head bolts that hold rearset to adaptor plate turn around, and on backside remove cotter pin, and remove...
so i have a hid light kit in the bike it comes on every time you turn the key some times when you go to start the bike the light hid light goes...
........the fact that this is my 315th post:thumbup
I have a GSXR and if your young like me youll have to have a restrictor kit installed. If your dealer are a pain in the but like mine they wont...
Hello. I just bought a set of LED license plate bolts/lights for my 08 750. Im not sure exactly how to install them. Does anyone have picture from...
When cleaning my chain is it safe to spray WD-40 directly on the chain before I start rubbing it down with a rag or is it safer to spray it on the...
K6 GSXR600. During ride to work, bike turned to crap. Bike running on #3 and 4 cylinders only. Pulled all spark plugs and noticed #1 and 2 were much...
can anyone please help me ive had my F reg gsxr for 4 years and never ridden it i bought it as a non runner and have had it in dry storage ever...
just got an 03 gsxr 600 about a month ago. did the minor tune-ups myself. looking for simple ways to improve performance. any suggestions
Ok I've got a gsxr 600 with power comander and stock exhaust like the sound akropovic shorty makes but will it do your head in on a long trip any...
Trouble finding the wiring harness for the brake light.
Here's how to remove the SET Valve. The original site is listed below. Posted by Nate. http://www.tfriders.com/phpBB3/viewtopic.php?f=9&t=71 ...
Hey guys. Do I have to threadlock the bolts on the Manifold? thanks!!
Ok first off the bike has been down on its left side. I cannot get the back seat off to access "storage area". I have the left rear fairing dangling...
Just bought an '06 gsxr 600 with 933 miles on it. Should I change oil? Is it still considered to be in its break in period? What other fluids should...
A buddy of mind bought a Twist electric supercharger for his car for 300$ and was not able to put it on since he got a bad speeding ticket and now...
When I bought my bike the guy told me it had a full yoshimura exhaust on it. Just wondering how to tell if is a full system or not? the bike also has...
Ok on my 03 GSXR 600, with 18000 miles, this started happening: I rode for about 30 mins, had lunch started on my way back, sitting at a light I put...
hey guys, im pretty sure this is a simple fix that can be easily solved with an owners manual and what not. But just recently my horn stopped...
I just bought a 2 Bros slip on for my 08' 750. Ive never changed a bike exhaust before. Anyone know where I can find some pics on how to change it?...
Hello everybody, I'm new here, just bought a second hand k8 GSX-R750 from a trusted person, so I'm pretty sure it's in good shape. However,...
Hey everyone, I have an 07 gsxr600 and just bought a yoshimura r55 full exhaust and power commander for it. I got a ridiculous deal on ebay, and got...
Got a question about the foot pegs on my k5 600. I know I have to drill the riveted bolts off of both sides to remove the stock pegs, but the...
just got a yoshimura r77 slip-on for my 07 1000 and was wondering if i should retune my efi or not to worry about it?
I just bought an 750 with 10k miles on it and it has always had amsoil in it but I want to start puting Rotella 15w40 in her. Is there any reason to...
hey, im just looking to swap the cams on my 05 gsxr 750. I know i need to get the 1000 cams and put them, i think, on the intake side and move the...
so i picked up a 1992 yz80 thats got all race parts and bored out to 110 but im wanting to replace the fluid in the rear shock and was wondering if...
I have a Signal Dynamics "Wig Wag" brake light modulator. I have let my friend borrow my multimeter, and am not sure how to wire this up. I have...
I worked in bicycle shops and raced mountian bikes for many years. In that time, I learned lots of little tricks. Mountain bikes are extreme...
What are you guys running?
I just have a quick question about the R1 throttle tube, what does it do exactly i have noticed that a lot of people have dont this as an upgrade?
I have a two brothers slip on exhaust and i was wondering what would be better a two brothers juice box or power commander? please help.
got an 07 gsxr 1000 Dont know what the deal is but when i accelerate the bike lurches its not smooth almost like there is a slight pause before it...
sandded the WHOLE THING and painted it and i really do like the end result instead of the bronze color
washed my bike today now it wont start it turns over but wont start please help :banghead
Hello, i recently bought a 04 gsxr 1000 that was set up as a street fighter. Well i am in the process of turning it back into a full fairing bike,...
ok i havent been around bike sences 05 so its been a while i got a great deal on a 04 750 and all it needs is a chain and i know you cant change just...
This was pulled from "Another" forum... :D You will need a Ratchet, 10mm socket, 2 10mm wrenches, needle nose pliers, and an allen wrench set. ...
It's not a GSXR, but I'm pretty proud of how it turned out. Background: When I purchased the SV650, the first thing I heard was "you will want to...
ok so I adjusted my TPS to where it is suppose to be and not i am getting an FI code that is a c-21 which according to the code post here is an...
anybody know how to adjust your TPS?
Hi, my 04 GSX 750 engine sputter intermittently between 4500 and 5500rpm regardless whether the throttle is open or close. There is no problem at...
So i installed my PC3 and all of the sudden it will not start unless i give it some throttle. the other night i was pulling it down the street from...
ok so i was looking through the mods and how tos and i know there was one refering to how long it took to polish the frame but im not sure exactly...
So recently I took my bike to my buddies car shop 5th Gear. I brought a set of ss brake lines up there that I bought off a member on here to install...
ok so now i fixed the problem with the guage it turned out to be the fuse but now i am getting an F1 code on the cluster and im not really sure why...
So I just got my new fairings on and double checked all the wiring again and went to turn the bike this morning and nothing on the guage cluster is...
I want to tune my bike and this shop says they can flash my ECU and skip power commander. has anyone tried this. they say the results are awesome is...
i was wondering if anyone knew how to take off the cowling on the tank of a K8 GSXR600, i got a new kit and i need to swap the old one out for the...
I changed oil in my bike last night for winter storage. Here is the story, I tried to loosen the 17mm bolt with the wrench in the tool kit, and it...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
